Mepco RC06-15-030-34-3 Centrifugal Pump 3Hp 3450RPM

Name: Mepco RC06-15-030-34-3 Centrifugal Pump 3Hp 3450RPM
Brand: Mepco
SKU: RC06-15-030-34-3
Availability: Discontinued

Images for general purposes only. Actual may be different than depicted.

Mepco RC06-15-030-34-3 Centrifugal Pump 3Hp 3450RPM

SKU: RC06-15-030-34-3

Brand:

Rating:

* This Product is Now Obsolete

View Replacement

Shipping Note

Ships via LTL ( Truck )

The RC06-15-030-34-3 is a three-phase close coupled centrifugal pump that consists of a case, impeller, mechanical seal, and a motor. The motor produces 3 Hp, has a 1-1/2" discharge pressure, and rotates at a speed of 3450 RPM. UL-recognized and CSA certified.

The RC06 Type Centrifugal Pumps can be used as a circulator for evaporative condensers, cooling towers, hot water, and chilled water systems. Applicable also in commercial or industrial supply systems for boiler feed, processing, drainage, washer service, and booster service.

Open drip-proof motor with Easy to maintain back pull-out case design, that allows parts to be replaced instantly without removing the case. The motor can be replaced with part number 5K48TN2181.

Casing	6"
Discharge	1-1/2"
Horsepower	3 Hp
Phase	3 PH
Speed	3450 RPM at 60 Hz
Maximum Working Pressure	175 PSI
Hydrostatic Test Pressure	265 PSI
Impeller Material	Bronze
Mechanical Seal	Buna N
Case/Adapter	Class 30 C.I

Download Product Information:

Mepco RC06 Pump Nomenclature Sheet

Mepco RC06 Centrifugal Pump Technical Datasheet

Mepco RC06 Centrifugal Pump Catalog

Be the first to write a review

Q & A: Ask the Questions, share answers

Do you have questions about this product?

Submit a New Question

I wonder if impeller is included in the pump? Or if its separate order, if so, in stock?

Asked on June 20, 2022 by SKYE from new jersey

1 Answers

Have an answer? Click Here

Yes, the impeller is included. The MEPCO RC06-15-030-34-3 is the complete pump, so the impeller is included; otherwise, the pump would not function properly and not move the water through it.

There are replacement impellers available for purchase for an existing pump, you should be able to purchase a replacement, however, we need either the trim size of the existing impeller (in case it has already been replaced or modified when it was installed) or a tag off of the existing pump to make sure we offer a replacement to the exact specifications as the unit in the field.

Replied on September 15, 2022 by Ori from Industrial Stores