The Maxitrol A1014R Amplifier is used for Selectra Series 14 Electronic Gas Flame Modulation System. The device gives output voltage to the M/MR Modulator Valve. It has wiring terminals, a power indicator, an integral discharge 40-80ºF temperature dial, and a sensitivity adjustment knob. To adjust the sensitivity, the right turn of the knob is to increase and turn left to decrease.
The Selectra Series 14 Systems is used for make-up air heating applications and gas flow control. Compatible with various gases such as natural gas, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures.
Features:
Complete Selectra Series 14 Basic System for make-up air heating:
| AMPLIFIER | SELECTION METHOD | REMOTE SELECTOR | SENSOR | OPTIONAL | |
| Override Stat | Inlet Air Sensor | ||||
| A1014R | Single Remote | TD114 | TS114/ MT1 or 2 | T115 | TS10765 |
| Dual Remote | TD114HD | TS114/ MT1 or 2 | - | - | |
| TD214 | TS214/ MT1 or 2 | - | - | ||
Note: When selecting a TD114 remote temperature selector, the temperature range must be the same as the TS114 sensor temperature range.
| Power Rating | 24 VAC, 50-60Hz Class II Transformer |
|---|---|
| Ambient Operating Temperature | -40 to 125F (-40 to 52C) |
| Gas | All Fuel Gases |
| Approval | CSA |
Download Product Information:
Maxitrol Selectra Series 14 System Installation Instructions
By mike
from
Yes, I would recommend this product to a friend or co-worker
Part was shipped on time - product worked
Q & A: Ask the Questions, share answers
Do you have questions about this product?
$ USD
CAD 
