Johnson Controls AS-COM1100-0 Communication Card For UNT/DCU/TCU Series

The COM1100 N2 Communication Module is an add-on module for small controllers requiring N2 networking to systems, such as the Unitary (UNT) controller to the Metasys® system. The module provides networking capabilities for FX10, UNT400 Series, and UNT10XX Series controllers that are specific to the needs of Original Equipment Manufacturers (OEMs). The COM1100 plugs in to the controller using a 12-pin connector (2 x 6-pin connector header) and four holes for standoff placement. An 8-position DIP switch provides N2 Addressing. The module has transmit and receive data optocouplers that provide isolation from noise and transients.

Use the COM1100 N2 Communication Module on controllers requiring communication over the N2 Bus. You can use the COM1100 on the following controllers:
• FX10 controllers
• UNT400 Series (YK-UNT40X-2) controllers
• UNT10XX Series (AS-UNT1008, AS-UNT1026, and UNT1044) controllers