Bell & Gossett 106189 Inline Booster Pump Series 100 Cast Iron 1/12Hp 1725 RPM

The industry standard circulator for decades, Series 100 is still the one by which most others are judged. With well over 10 million units installed, the Series 100 remains a leader in applications such as hydronic heating and domestic hot water circulation.

Series 100′s three-piece, oil lubricated design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced. The Series 100 oil lubricated motor is specifically designed for the Series 100, and its resilient mounting provides quiet, dependable service with minimum annual lubrication. UL and CSA listings are standard.

The design of this motor, coupled with its overall hydraulic performance, allows the Series 100 to overcome system related noise caused by valves, fittings, or piping.

Applications

Bell & Gossett Pumps may be used for water circulating applications in hydronic, solar and chilled water systems. Bell & Gossett recommends that bronze constructed pumps be used for pumping potable water. For other applications contact your local Bell & Gossett Representative. Note that some local codes require using a check valve in the supply line when recirculating potable water. It has not been investigated, nor is it intended for use in swimming pool and marine areas.

Features

These pumps are designed to pump liquids compatible with their iron or bronze body construction. Unless special provisions have been made by ITT Bell & Gossett, the operational
limits for Series 100, HV, PR and 2" Pumps are listed below.

Do not exceed these values.

• Maximum Working Pressure: 125 psi
• Maximum Operating Temperature: 225ºF
• Electrical Rating: 115V, 60 Hz, 1PH